如何在 Windows 和 macOS 上对 WD 硬盘进行分区和格式化.*END
外置硬盘和固态硬盘已预先格式化, 可以直接使用。内部硬盘没有预先预格式化, 需要在使用前进行分区和格式化。
选择操作系统
操作系统
说明
Windows 10 and 8.1
单击此处查看说明
Windows 7 and Windows Vista
单击此处查看说明
macOS 10.13.x (High Sierra)
单击此处查看说明
macOS 10.11.x (El Capitan) and macOS 10.12.x (Sierra)
单击此处查看说明
macOS 10.9.x (Mavericks), and macOS 10.10.x (Yosemite)
单击此处查看说明
macOS 10.7.x (Lion), and macOS 10.8.x (Mountain Lion)
单击此处查看说明
Windows and macOS (exFAT & FAT32)
单击此处查看说明
APFS 格式的硬盘可以在macOS High Sierra (10.13)中读取，但无法在macOS Sierra (10.12) 或更早的版本中读取。 更多信息，请查看Apple KBA ID HT208018 - Prepare for APFS in macOS High Sierra
If the following message occurs during the format procedure, MediaKit reports not enough space on device for requested operation. Operation failed..., please refer to Answer ID 20270: macOS Disk Utility Error "MediaKit reports not enough space on device for requested operation"
For instructions to convert a drive to (APFS) Apple File System Format on macOS High Sierra (10.13), please refer to 答案ID 9963: Retired: 如何将 WD 外部驱动器转换为 APFS 格式
重要: If at any time an error occurs stating that the drive can not be dismounted or unmounted, this is not caused by an issue with the hard drive. Please see 答案 ID 5269: 对驱动器格式化或分区时，出现错误提示，不能卸载或安装驱动器。 for additional information on this particular issue.
Please select an 操作系统（OS） from the table above to display instructions for a specific OS.
How to Partition and Format a Drive on Windows 10 and 8.1
Partitioning a hard drive means preparing it to be used by the 操作系统（OS）, creating a Volume for the OS to use. Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together.
危急: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Windows 10 includes a built in utility known as Disk Management that can be used to partition and format a hard drive. To partition and format the drive with Disk Management, follow these steps:
Right-click on Start, the Windows logo on the bottom-left of the screen, and click Disk Management.
In the Disk Management window, the lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted, and make sure that all critical data on this drive has been backed up elsewhere. If there is already a partition on the drive, the bar above that drive will appear blue. If there is no critical data on the drive, or the data has been successfully backed up, right-click the bar and click Delete Volume.
重要: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see 答案 ID 13547: 如何在 Windows（7、Vista、XP、2000）的环境中初始化或将标志写入备用硬盘驱动器或固态硬盘.
If there is no partition and data on the drive, it will appear as Unallocated, with a black bar on top. Right-click the Unallocated space or the black bar, and click New Simple Volume.
The Welcome to the New Simple Volume Wizard will open. Click Next to proceed.
Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space.
注意:
To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition.
Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter.
Next is the File System, which controls how the data is read and written. Set the file system to NTFS, which is the default Windows file system, and leave the Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Book or WD Black 1. Check the box labeled Perform a quick format and click Next.
Click Finish to begin formatting the drive.
When complete, the drive will appear with a blue bar as in the image below.
返回顶部
How to Partition and Format a Drive on Windows 8 or 8.1
Partitioning a hard drive means preparing it to be used by the 操作系统（OS）, creating a Volume for the OS to use. Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together.
危急: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Windows 8 includes a built in utility known as Disk Management that can be used to partition and format a hard drive. To partition and format the drive with Disk Management, follow these steps:
Right-click on the lower-left corner of the desktop screen and click Disk Management.
In the Disk Management window, the lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted, and make sure that all critical data on this drive has been backed up elsewhere. If there is already a partition on the drive, the bar above that drive will appear blue, which indicates the drive is already formatted and may contain data. If there is no critical data on the drive, or the data has been successfully backed up, right-click the bar and click Delete Volume.
重要: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see 答案 ID 13547: 如何在 Windows（7、Vista、XP、2000）的环境中初始化或将标志写入备用硬盘驱动器或固态硬盘.
If there is no partition and data on the drive, it will appear as Unallocated, with a black bar on top. Right-click the Unallocated space or the black bar, and click New Simple Volume.
Click Next to proceed.
Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space.
注意:
To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition.
Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter.
Next is the File System, which controls how the data is read and written. Set the file system to NTFS, which is the default Windows file system, and leave the Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Passport or WD Black 1. Check the box labeled Perform a quick format and click Next.
Click Finish to begin formatting the drive.
When complete, the drive will appear with a blue bar as in the image below.
Return to Top
How to Partition and Format a Drive on Windows 7 and Windows Vista
危急: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Windows includes a built in utility known as Disk Management that can be used to partition and format a hard drive. To partition and format the drive with Disk Management, follow these steps:
Click on Start and right-click Computer.
Click on Manage.
A window called Computer Management will open, displaying two panes. On the left-side pane, under Storage, click on Disk Management. This will load Disk Management on the right-side pane. Disk Management will proceed to display all the hard drives detected by Windows. The window may need to be maximized in order to see all the drives listed.
The lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted. It typically has a black bar indicating unallocated space.
重要: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see 答案 ID 13547: 如何在 Windows（7、Vista、XP、2000）的环境中初始化或将标志写入备用硬盘驱动器或固态硬盘.
If there is already a partition on the drive, the bar above that drive will appear blue. this indicates that the drive is already formatted and may contain data. Make sure that all critical data on this drive has been backed up elsewhere. When ready to proceed, right-click on the blue bar and choose Delete Volume. The bar should now be black.
Right-click on the unallocated space or the black bar to see a menu of available options, and click on New Simple Volume.
The Welcome to the New Simple Volume Wizard will appear. Left-click on Next to proceed to the next screen.
Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space.
注意:
To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition.
Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter.
Next is the File System, which controls how to data is read and written. Set the file system to NTFS, which is the default Windows file system, and set Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Passport or WD Black 1. Check the box labeled Perform a quick format and click Next.
Click Finish to begin formatting the drive.
注意:
If an error message is received stating that Windows is unable to unmount the drive, this means that there is a program or service currently reading or writing data on the drive. Determine what program is accessing the drive and shut it down, and then try again. Please see 答案ID 27745: 不能安全的移除一个WD Windows外部硬盘 for assistance with this error under Windows.
The listing for the drive (Disk 3 in the picture below) will say Formatting as it formats the drive. This process may take a few seconds.
When the drive is done (Disk 3 in the picture below), the bar will be blue and the drive will say Healthy.
返回顶部
How to Partition and Format a Drive on Windows Vista
Partitioning a hard drive means preparing it to be used by the 操作系统（OS）, creating a Volume for the Operating System to use. Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together.
危急: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Windows Vista includes a built in utility known as Disk Management that can be used to partition and format a hard drive. Please see Answer ID 2638: 如何在 Windows 8、Windows 7、Windows Vista 或 Windows XP 上访问“Disk Management”（磁盘管理）来管理硬盘 for more information.
Please follow the steps outlined below:
The lower pane will display a list of available drives. Identify the drive that needs to be partitioned and formatted. It typically has a black bar indicating unallocated space.
重要: If Disk Management shows the drive as Not Initialized, the drive will have to be initialized. For assistance initializing a hard drive, please see 答案 ID 13547: 如何在 Windows（7、Vista、XP、2000）的环境中初始化或将标志写入备用硬盘驱动器或固态硬盘.
If there is already a partition on the drive, the bar above that drive will appear blue. this indicates that the drive is already formatted and may contain data. Make sure that all critical data on this drive has been backed up elsewhere. When ready to proceed, right-click on the blue bar and choose Delete Volume. The bar should now be black.
Now right-click on the unallocated space or the black bar to see a menu of available options, and click on New Simple Volume
The Welcome to the New Simple Volume Wizard will appear. Left-click on Next to proceed to the next screen
Choose the volume size and click Next. By default, the maximum disk space is already selected and it is recommended to leave it at the maximum disk space.
注意:
To create multiple partitions, select or type a specific number of megabytes (MB) for the first partition and continue to the next step. Once done with this process, the remaining space will display as unallocated space. Now, create another New Simple Volume in the remaining unallocated space for the next partition. For example, on a 2TB drive, set the volume size to 1000000 (1 TB) and continue to the next step. When done, begin the New Simple Volume process again and select the remaining capacity, the unallocated space, for another 1TB partition.
Assign a drive letter to represent the volume being created, and click Next. By default, this is the next available letter
Next is the File System, which controls how to data is read and written. Set the file system to NTFS, which is the default Windows file system, and set Allocation unit size to Default. The Volume Label field can be customized in order to give the volume a desired name, such as My Passport or WD Black 1. Check the box labeled Perform a quick format and click Next
Click Finish to begin formatting the drive
注意:
If an error message is received stating that Windows is unable to unmount the drive, this means that there is a program or service currently reading or writing data on the drive. Determine what program is accessing the drive and shut it down, and then try again. Please see 答案ID 27745: 不能安全的移除一个WD Windows外部硬盘 for assistance with this error under Windows.
The listing for the drive (Disk 1 in the picture below) will say Formatting as it formats the drive. This process may take a few seconds
When the drive is done (Disk 1 in the picture below), the bar will be blue and the drive will say Healthy
返回顶部
How to partition and format A DRIVE ON macOS 10.13.x (High Sierra)
Open Disk Utility. Please See 答案 ID 6702: 如果在 Mac 电脑上访问磁盘工具（Disk Utility）
In the top menu bar, go to View, and choose Show All Devices
Click the eject button next to the drive volume (My Passport, etc)
The drive Volume will now be greyed out
Select the drive (WD My Passport _____ Media, etc)
Click the Erase button
Choose a new Format: Mac OS Extended (Journaled)
Choose Scheme: GUID Partition Map
Type the drive new Name
Click the Erase button
When finished, the drive will be formatted and repartitioned successfully. Click the Done button
返回顶部
危急:
The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Steps for macOS 10.11.x (El Capitan) and macOS 10.12.x (Sierra)
Open Disk Utility. Please See 答案 ID 6702: 如果在 Mac 电脑上访问磁盘工具（Disk Utility）
Click the Eject button next to the external hard drive volume (My Passport, etc)
The drive will now be greyed out
Click the Erase button
Choose a new Format: Mac OS Extended (Journaled)
Choose Scheme: GUID Partition Map
Type the drive new Name
Click the Erase button
When finished, the drive will be formatted and repartitioned successfully. Click theDone button
返回顶部
How to Format or Partition a Drive on Mac OSX 10.9.x (Mavericks) and 10.10.x (Yosemite)
Partitioning a hard drive means preparing it to be used by the 操作系统（OS）, creating a Volume for the OS to use. Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together.
危急: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Mac OSX 10.9.x, and 10.10.x include a built in utility known as Disk Utility that can be used to partition and format a hard drive. To partition and format the drive with Disk Utility, follow these steps:
Double left-click on the Mac HD, the internal Mac hard drive visible on the top-right corner of the desktop screen. Choose Applications from the left-side panel. While in there, open Utilities, and lastly double-click on Disk Utility.
Disk Utility will now be open. In the left-side pane, choose the drive that is to be partitioned and formatted. Typically there are two listings for each drive unless more than one partition exists on a particular drive. Choose the drive listing that is farthest to the left for the drive that will be formatted. It is usually directly above the name of the drive. In the example below, the one to be selected would be 495.78 GB WD My Passport 0830 Media.
After selecting the appropriate drive, additional options will appear on the right-side pane. Click on Partition.
In the Partition area, click on the drop-down box under Partition Layout and select 1 Partition.
注意:
Partitioning a drive is only necessary if planning to use multiple partitions on the drive. It's recommended using a single partition in most cases, if the primary objective is to simply prepare the drive for use with the computer, no partitioning is required. No further action is required.
Click on the drop-down next to Format and from the drop-down menu select Mac OS Extended (Journaled). This is the format that the drive will be formatted to.
In the Name area, a drive name can be given to the drive by just typing in the desired name or drive label.
Click the Options button and choose Apple Partition Map. Then, click on Ok. Lastly, click on Apply.
重要: If the Mac computer being used is an Intel-based Mac, Apple recommends to use the GUID Partition Table instead.
A confirmation box will appear, reminding users that partitioning and formatting the drive will erase all information that is on the drive. Make sure that all critical information on the drive is backed up elsewhere before continuing. If not, copy the data to another location. When ready, click on Partition.
The disk will be unmounted before being formatted.
注意:
If an error message is received stating that the drive is unable to be unmounted, this means that there is a program or service currently reading or writing data on the drive. Determine what program is accessing the drive and shut it down before trying to format the drive again. If the error message persists, restarting the computer may resolve the issue. If additional assistance is required, please 联系我们.
The drive is now formatting and at the bottom of the Disk Utility panel a Status Bar displaying the name of the drive, the format that's being applied to it, as well as the given name. When finished, the bar will go away and the drive will now be listed on the desktop.
返回顶部
How to Format or Partition a Drive on Mac OSX 10.7.x (Lion) and 10.8.x (Mountain Lion)
Partitioning a hard drive means preparing it to be used by the 操作系统（OS）, creating a Volume for the OS to use. Formatting, however, deletes the content of a volume to clean it, and assigns a file system to it so that data can be moved into and out of the volume. Both processes are normally done together.
危急: The instructions in the article below are designed to help repartition and format a hard drive. This process is Data Destructive and cannot be undone. Once the process begins, ALL THE DATA ON THE DRIVE WILL BE LOST!
Mac OSX 10.7.x, and 10.8.x include a built in utility known as Disk Utility that can be used to partition and format a hard drive. To partition and format the drive with Disk Utility, follow these steps:
Double left-click on the Mac HD, the internal Mac drive. Choose Applications, then Utilities, and double-click on Disk Utilities.
注意:
If the screen does not look like the one in the picture below, the folder view may be set to a different one. Click on the Columns button (it's highlighted in blue in the screenshot) in the upper left corner of the window to change to the same view used here.
In the far left pane, choose the drive that is to be partitioned and formatted. Typically there are two listings for each drive, unless that particular drive has more than one partition in it. Choose the drive listing that is farthest to the left for the drive that is to be formatted. It is usually directly above the name of the drive. Once the drive has been selected, click on the Partition tab.
Under Volume Scheme click the drop-down box and select 1 partition.
Now, click the Options button and choose Apple Partition Map, then click on Ok.
重要: If the Mac computer being used is an Intel-based Mac, Apple recommends to use the GUID Partition Table instead.
Click on the drop-down next to the Format option and change the Format to Mac OS Extended (Journaled). A name can also be given to the drive by typing it into the Name box. When done, click on Apply.
A box will come up warning that formatting and partitioning the drive will erase all of the information that is on the drive. If the information on the drive is no longer needed, then click on Partition. If the data on the drive is still needed, it will need to be copied to another location before proceeding.
The drive is now formatting, and a status bar will be displayed at the bottom of the Disk Utility window. This status bar will say formatting the disk, and gives the name of the drive, the format it is applying, and the name that was specified for it. When it is done, this bar will go away and the drive should now be listed on the desktop.
If additional assistance is required, or more information is needed, please 联系我们. Do not use the answer rating below to report technical issues.
返回顶部
Formatting A WD Drive To Be Compatible With Both Windows and Mac OSX
Please see 答案ID 22712: 怎样将 WD 外置硬盘格式化为 FAT32 格式（供在 Windows 或 Mac OSX 中使用） for assistance formatting a drive to be used on both a Windows PC and a system running Mac OSX.